← Back to blog

Meet and Greet Signage: What to Put on the Sign and Where

November 13, 2026
Meet and Greet Signage: What to Put on the Sign and Where

A good meet-and-greet sign does one job: it lets one specific traveler recognize one specific driver in seconds, without telling anyone else who that traveler is. For executive and official arrivals in the US, that means a legible name or agreed reference, no sensitive detail, a greeter in an agreed position, and an airport permit where the airport requires one. This guide sets out what belongs on the sign, what stays off, how airports regulate greeters and how to brief the driver so the handoff is quiet and on time.

Chauffyr
Make Airport Arrivals More Seamless
Chauffyr coordinates discreet airport transfers with real-time flight tracking for executives, officials, and delegations.
Visit

TL;DR

  • Put only what the traveler needs to spot the sign: a name or agreed reference, and optionally a flight number or group name. Leave off titles, itineraries, phone numbers and company details that do not help recognition.
  • US airports regulate greeters. One airport authority requires a visible terminal pass and limits the number of passes per operation, and another says the operator's name may appear only in a small, non-conspicuous spot.
  • Position matters more than the sign itself. Put the exact meeting point in the confirmation, so the traveler and the driver are looking at the same place.
  • For officials and delegations, protocol offices at major airports can arrange gate passes and arrival access in advance. Ask early.
  • Chauffyr drivers track the live flight status and meet principals at commercial terminals and private FBOs, so the sign is the last step of a plan that is already running.

Table of Contents

What a meet-and-greet sign is for

At a crowded arrivals hall, a traveler who has just landed is tired, possibly jet-lagged, and scanning dozens of boards. The sign is a recognition tool. It is not an advertisement, an invitation or a badge of rank. The best signs are plain, high-contrast, large enough to read from several yards away and carried by someone positioned where arriving passengers will pass.

Greeter holds a sign in an airport arrivals hall

That purpose explains most of the rules below. Anything that does not help the right person find the right driver, or that helps the wrong person learn who is arriving, does not belong on the sign.

What to put on the sign

The clearest official guidance we found comes from the Metropolitan Knoxville Airport Authority. Its temporary ground transportation permit says a greeting or directional sign must clearly and prominently identify the name of the event, organization or group seeking transportation services, and may include the flight number, airline or departure city if preferred. The same document says the operator's name may appear only in a non-conspicuous location and size.

Translate that into a working template:

ElementInclude?Why
Traveler surname, or an agreed referenceYes, largeThe one thing the traveler scans for
Event or group nameYes, for delegations and roadshow teamsLets several people in one party recognize it
Flight number or airlineOptionalHelps match the right arrival when several pickups are close together
Operator nameSmall, low on the signAirports often restrict conspicuous branding
Title, rank or organization of a principalUsually noTells bystanders who is important
Phone numbers, hotel, itineraryNoNot needed for recognition and sensitive if the sign is photographed

Names versus agreed references

A full printed name is the default and works for most business travel. For principals who prefer not to be named in a public hall, agree a reference in advance: a surname only, an initial, a project name or a short code the traveler has been told. The traveler must know the reference before landing, so put it in the itinerary the assistant sends, not in a last-minute text.

The tradeoff is simple. The more discreet the reference, the more the traveler depends on the message that told them what to look for. Confirm that the principal has actually read it.

Wording and format

Keep the text short and in a typeface that stays legible at a distance. Use capital letters or a clean sans-serif, dark text on a light background or the reverse, and no decorative script. Print rather than handwrite where you can. One line for the name, one smaller line for the group or flight if needed, and nothing else.

For groups, a consistent sign matters more than a clever one. If twelve members of a delegation are arriving on one flight, the leader needs to see the same board the rest of the party was told to expect.

What to leave off

Signs are visible to everyone in the hall, and photographs of them travel. Three categories of detail are worth keeping off.

Three categories of details to keep off signs

Status and affiliation. A sign reading a ministry, a fund or a company name beside "Mr. Director" tells every observer who is arriving and from where. If the affiliation is needed for the airport, supply it in the permit request, not on the board.

Contact and itinerary details. Phone numbers, hotel names and onward flight times add nothing to recognition and add risk.

Promotion. Airports treat signs as identification, not marketing. The Wayne County Airport Authority, which runs Detroit Metropolitan Wayne County Airport, states in its welcome banner and meet-and-greet guidelines that these operations are not to be used for soliciting or advertising any company, service, association or group, and that unapproved operations will be asked to vacate the area immediately.

Airport rules that shape the sign and the greeter

There is no single national rulebook for greeter signs in the US. Each airport authority sets its own conditions, and they differ on permits, passes, placement and branding. Two public examples show the range.

Permits and terminal passes

At Detroit Metropolitan Wayne County Airport, the authority's 2025 guidelines state that every greeter must have a terminal pass worn on the outermost layer of clothing above the waist at all times, and that a maximum of ten passes may be requested per operation. The August 2023 version adds that greeters should wear identifiable clothing so arriving guests can recognize them, and that items left unattended will be reported to Airport Police immediately.

In practice, that means three things for the assistant booking the pickup:

  1. Ask whether the airport requires a permit or pass for a greeter and how far ahead it must be requested.
  2. Size the greeting party to the pass limit. A delegation arrival needing more than a handful of greeters needs a plan before the day.
  3. Treat the sign as something the driver holds, never something left on a counter or a stand.

Rules at Knoxville and Detroit are examples, not a universal standard. Check the airport's own ground transportation or customer service page for the airport your principal is flying into.

Where the greeter stands

US terminals are designed with a space for people meeting arrivals. The FAA's airport signing and graphics advisory circular, AC 150/5360-12F, notes that in the meeters and greeters hall, displays provide flight arrival information to people meeting arriving passengers, including airline, flight number, origin city, time of arrival and status. A driver standing near those displays can watch the same information the public sees while waiting.

Where the sign goes depends on the airport layout and the type of arrival:

  • Commercial terminal, domestic arrival: the public arrivals area outside security, near baggage claim or the meeters and greeters hall, as the airport permits.
  • Commercial terminal, international arrival: the public side of the customs exit, unless advance access has been arranged for officials (see below).
  • Private aviation: the FBO, the private terminal for general aviation, where the driver typically meets the principal at the aircraft or inside the lounge by arrangement.

The key practice is to name the exact point in the confirmation: which door, which carousel, which side of the hall. A driver at one door and a passenger exiting at another is a failed meeting, however good the sign.

Protocol arrivals: officials, delegations and sensitive travel

Some travelers should not be waiting in a public hall at all. For heads of delegation, government officials and diplomats, major airports run protocol offices that handle access in advance.

The Miami-Dade Aviation Department's Courtesies of Port handbook describes protocol expedite services that include arranging protocol gate passes for pre-cleared greeters to reach post-security areas, arranging international arrival access badges so a party can be met at the gate, and coordinating with Customs and Border Protection on entry formalities. Other airports have comparable offices, and the request usually has to come from the right channel, such as an embassy, a state protocol office or a sponsoring agency.

Outside the US, the same logic holds. Belgium's Federal Public Service Foreign Affairs publishes a protocol guide for visits and airport access that sets procedures for diplomatic missions in Brussels dealing with dignitaries and official guests. Foreign delegations connecting through multiple countries benefit from a single plan that accounts for each airport's rules.

For these arrivals the sign is often the least important part. Pre-cleared greeters, a named point on the apron or at the gate, a driver who already holds the manifest and a vehicle staged close by do the work. The sign becomes a backup identifier for the moment of contact.

Private jet arrivals

FBO arrivals work differently. The principal steps off the aircraft into a private terminal with its own staff, and the car is typically brought close. Signs matter less, but the confirmation still needs the FBO name, the tail number if the planner has it and the meeting point. A short primer on private jet etiquette helps first-time flyers on a delegation know what to expect on the ramp and in the lounge.

How to brief the driver so the handoff works

The sign is the visible half of a process. The other half is the brief. A checklist an executive assistant can send with every booking:

  1. Traveler details the driver needs: name or agreed reference, flight number, airline, arrival terminal and number of passengers and bags.
  2. The exact meeting point: door, carousel, hall or FBO lounge, in writing.
  3. What the sign will read: so the principal sees it described in their own itinerary before arrival.
  4. A contact for the day: a direct line to a person who can reroute the driver.
  5. A plan for the unexpected: what to do if the flight is early, late or lands at a different terminal or gate.

A useful script for the moment of contact keeps it brief: the driver raises the sign, makes eye contact, says the traveler's name or reference, introduces themselves, takes the luggage and walks the traveler to the vehicle, answering where the car is and how long the walk is. It should feel unhurried. Discretion is largely about not creating a scene.

When the flight is delayed or the meeting point changes

Flights land early, late or at a different gate. The driver should not be working from the scheduled arrival time. Real-time flight tracking lets a driver adjust the pickup to the live status of the flight, so the sign is raised when the traveler is actually coming through, not an hour before. If the airline changes the arrival terminal, the driver needs to hear it from the dispatcher, not from the traveler by text.

If the traveler cannot see the sign, they should have a number to call that reaches a person who can talk the driver to them. Put that number in the itinerary, not on the sign.

How we handle the sign at Chauffyr

Our work is built around the arrival. We track flights in real time, so pickups follow the live status of the flight. Our drivers are vetted and protocol-aware, and we meet principals at commercial terminals and at private FBOs, on one global desk that operates around the clock across more than 500 airports in over 90 countries. For an assistant coordinating several principals landing in different cities, that means one confirmation format and one team to call, not a separate arrangement at every airport.

For airport-specific meeting points and pickup instructions, our arrival pickup guide and airport directory cover the airports we serve. For late arrivals, our overview of late-night airport pickups explains what to expect after the last bank of flights.

Our view: the best sign is the one nobody notices

We think about signage the way a protocol officer does. The goal is a handoff so smooth that no one in the hall learns who was met. That starts before the traveler lands: a confirmation that names the exact meeting point, a driver who knows the live status of the flight and a sign that carries the minimum needed to be recognized.

For executive assistants, the value is in not having to supervise the details. When a single desk holds the manifest, the flight status and the driver's position, the assistant is not the one relaying a changed gate by text at midnight. For delegations and officials, discretion and protocol awareness are part of the job, not an add-on.

We would rather a principal walk out, see a clean sign with one name and be in the car within minutes than see anything more elaborate. Quiet is the standard.

Deep

Arranging the pickup

If you are booking airport arrivals for one principal or a delegation, Global Airport Transfers covers meet-and-greet at commercial terminals, and our FBO and private aviation service covers private jet arrivals. For teams and delegations travelling together, see Group and Delegation Transport.

Chauffyr

We handle airport transfers worldwide with vetted drivers, consistent late-model vehicles and real-time flight tracking. Send us the flight, the principal's preferred reference and the meeting point you want, and we build the pickup around them. Start from Chauffyr to request a booking or a custom program for a delegation or event.

FAQ

What should a meet-and-greet sign say?

Use the traveler's surname or an agreed reference, in large, high-contrast print. A flight number, airline or group name is optional and helps when several pickups overlap. One airport authority's permit says a sign should clearly identify the event, organization or group, with the operator's name small and unobtrusive. Leave off titles, phone numbers and itineraries.

Can a meet-and-greet sign show the company name?

Airports often limit it. The Knoxville airport authority's permit allows the operator's name only in a non-conspicuous location and size, and Detroit's authority says meet-and-greet operations must not be used for advertising. Keep branding small and check the airport's current rules before the day.

Do greeters need a pass to wait inside the terminal?

At some airports, yes. Detroit Metropolitan Wayne County Airport requires each greeter to wear a terminal pass on the outermost layer of clothing above the waist, and caps passes at ten per operation. Other airports have different rules, so confirm with the airport's ground transportation office or the booking team in advance.

How do officials and delegations avoid waiting in a public hall?

Major airports can arrange protocol services in advance. Miami-Dade's protocol handbook, for example, describes gate passes for pre-cleared greeters and access badges to meet international arrivals at the gate. The request normally comes through an official channel, so start it well before travel.

What if the flight is delayed or the traveler cannot find the sign?

A driver working from live flight status adjusts to the real arrival time. Give the traveler a direct number to call, include the exact meeting point in the confirmation and tell the driver at once if the terminal or gate changes.

Sources